Fiber OneShot Pro - Optical Fiber Inspection System | Fluke Networks

Fiber OneShot™ PRO

Single Mode Fiber Distance and Fault Locator
  • Works on single mode fiber, 9/125µm
  • 1550nm output wavelength. Compatible with standard PON wavelengths: 1310, 1490, 1550 and 1625nm
  • Measure up to 75,459 feet (23,000 metres) of fiber in seconds
  • Locate severe bends, high-loss splices, breaks and dirty connectors in singlemode fiber
  • Measure and locate high loss connections and breaks
  • Locate the end of a fiber
  • Find potential sources of high bit error rates caused by reflectance from dirty or poor connections
  • Detects live optical signals before it begins testing
  • Quick set-up. Connect your fiber and press the Test button. No lengthy set-up necessary
  • Find problems quickly. Six-second test time—no more blind troubleshooting that can waste hours
  • Change the Index of Refraction (IOR) to improve fiber length accuracy
  • Visible in dark areas. Backlighted display turns off automatically
  • Removable SC adapter is easily cleaned
  • Optional LC, ST and FT interchangeable adapters are available
  • Long battery life, 1,500 tests (typical) from 2 AA alkaline batteries
  • Rugged construction; vibration and drop tested to 1 meter
See the Pro in Action
View Video
Talk to an Expert Where to Buy
 
 

Overview

VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks. They are not very helpful for cable runs more than a few meters, or when the cable not visible or accessible, or when the laser light can’t penetrate the jacket.

Optical Time Domain Reflectometers (OTDR) provides graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time to and skill to operate.

Fiber OneShot PRO in fiber optic tool kit fills the gap between a VFL and an OTDR. These optical inspection system have the simplicity of a VFL, and provide distance and power information on high losses, breaks, and the end of the fiber. They also identify live fiber.

"I use my Fluke Networks Fiber One Shot Pro fiber troubleshooter to locate faults in our network. It has never failed me and has proved to be very accurate. It has saved me hours of painstaking testing, but more importantly its use has resulted in better customer service through faster service restoration. Thank you for making a great product and keep up the good work!!"
Jody H.
MTS
Winnipeg, MB CA

VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks. They are not very helpful for cable runs more than a few meters, or when the cable not visible or accessible, or when the laser light can’t penetrate the jacket.

Optical Time Domain Reflectometers (OTDR) provides graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time to and skill to operate.

Fiber OneShot PRO in fiber optic tool kit fills the gap between a VFL and an OTDR. These optical inspection system have the simplicity of a VFL, and provide distance and power information on high losses, breaks, and the end of the fiber. They also identify live fiber.

 

Features

Fiber OneShot PRO Benefits

Saves time—analyzes your fiber link in less than five seconds and it can cut the average job time up to 30 percent

Easy to use—no confusing data to interpret and its one-button test feature means no training necessary

Portable—handheld and ruggedly built for the outdoor environment

Fiber OneShot PRO Capabilities
  • Measure  up to 75,459 feet (23,000 metres) of fiber in seconds
  • Locate severe bends, high-loss splices, breaks and dirty connectors in singlemode fiber
  • Save and store up to 99 test results for later review
  • Confirm channel connectivity by analyzing the fiber link
  • Locate sources of bit-error rates caused by end-face contamination or poor connection leads
  • Reports up to nine multiple events per fiber link
Fiber OneShot PRO Customer Comments
  • "No running between the fault and hub"
  • "Cut our average job time by up to 30%"
  • "Gives me a quick snapshot of the fiber’s status"
  • "Recommended to my boss to buy one for the crew"
  • "33% of our testing is in no-light situations. This is great for measuring in those situations"
  • "It’s light, it’s portable, it’s a really good tool"
Fiber OneShot PRO Customers
  • Regional Bell Operating Companies & Service Providers
  • Cable Television Operators/MSOs
  • Independent, Regional & Rural Telcos
  • Singlemode Network Technicians
  • Contractors
  • Network Installers
  • Metropolitan Networks
 

Models & Accessories

 
Models
Model Number/Name Description
FOS-S

Includes single mode fiber fault locator unit, screw on interchangeable SC adapter, 4-language Quick Reference Guide (manuals in 9 languages available on-line), safety instruction manual, and batteries. See Photo

FOS-100-S

Includes single mode fiber fault locator unit, screw on interchangeable SC adapter, UPC-UPC 2-meter patch cord, carrying case, 4-language Quick Reference Guide (manuals in 9 languages available on-line), safety instruction manual, and batteries See Photo

FOS-100-S Gold Support:
GLD-FOS-100-S1 YR Gold Support for FOS-100-S
FOS-100-S-VFL

Includes; single mode fiber fault locator unit, screw on interchangeable SC adapter, UPC-UPC 2-meter patch cord, carrying case, 4-language Quick Reference Guide (manuals in 9 languages available on-line), safety instruction manual, and batteries. VisiFault Visual Fault Locator with 2.5 mm universal adapter is also included See Photo

FOS-100-S-VFL Gold Support:
GLD-FOS-100-S-VFL1 YR Gold Support for FOS-100-S-VFL
FOS-SFP-PM

Includes single mode fiber fault locator unit, screw on interchangeable SC adapter, UPC-UPC 2-meter patch cord, carrying case, 4-language Quick Reference Guide (manuals in 9 languages available on-line), safety instruction manual, and batteries. SimpliFiber Pro optical power meter and SC adapter, and Visifault Visual Fault Locator are also included See Photo

FOS-SFP-PM Gold Support:
GLD-FOS-SFP-S1 YR Gold Support for FOS-SFP-S
 
Accessories
Model Number/Name Description
FIBR-AC-UAPC

1-meter UPC-APC launch cord

FIBR-UPC-CORD-2M

2-meter UPC-UPC patch cord

SMC-9-SCSC
Singlemode launch cable 9 µm SC/SC See Photo
SMC-9-SCLC
Singlemode launch cable 9 µm SC/LC See Photo
SMC-9-LCLC
SINGLEMODE LAUNCH CABLE 9µm LC/LC See Photo
SMC-9-SCST
Singlemode launch cable 9 µm SC/ST See Photo
SMC-9-STST
SINGLEMODE LAUNCH CABLE 9 µm ST/ST See Photo
SMC-9-SCFC
Singlemode launch cable 9 µm SC/FC See Photo
SMC-9-FCFC
SINGLEMODE LAUNCH CABLE 9 µm FC/FC See Photo
SMC-9-SCSCAPC
Singlemode launch cable 9 µm SC/SCAPC See Photo
SMC-9-SCFCAPC
Singlemode launch cable 9 µm SC/FCAPC See Photo
SMC-9-SCLCAPC
Singlemode launch cable 9 µm SC/LCAPC See Photo
NFC-Kit-Box
Fiber Optic Cleaning Kit
FI-500

FiberInspector Micro with Probe, Display, 4 UPC tips (LC bulkhead, SC bulkhead, 1.25mm end face adapters and 2.50mm end face adapters), case, rechargeable batteries and universal power adapter See Photo

PA-SC
Screw on SC adapter (not for older meters with rectangular style)
PA-LC
Screw on LC adapter (not for older meters with rectangular style)
PA-FC
Screw on FC adapter (not for older meters with rectangular style)
PA-ST
Screw on ST adapter (not for older meters with rectangular style)
 

Specifications

 

Specifications are typical.
Dimensions

17.5 cm H
7.8 cm W
3.8 cm D
.35 kg weight including batteries

Operating temperature with the battery0ºC to 50ºC
Non-operating temperature-20ºC to 60ºC
Operating relative humidity
(without condensation)
95% (10ºC to 35ºC)
75% (35ºC to 40ºC)
uncontrolled < 10ºC
VibrationRandom, 5 Hz to 500 Hz, MIL-PRF- 28800F CLASS 2
Shock1-metre drop test
Altitude9,842 feet/3000 metres
EMCEN 61326-1:2004
Battery type2 AA alkaline batteries (no battery charger)
Battery lifeMore than 1500 tests (typical)
Laser safetyClass 1 CDRH
Complies to EN 60825-2
LCD typeBacklit black and white (segments)
Index of refraction range1.45 to 1.5 (factory default is 1.468)
Auto turnoffAutomatically turns off after 5 minutes if no keys are pressed.
Backlight turns off first.
Factory calibration intervalNone
Output wavelengths1550nm ± 20nm at 25ºC
Laser classificationClass 1 CDRH Complies to EN 60825-2
Maximum distance75,459 feet or more than 23,000 metres
Maximum number of incidents shown9
Distance accuracy± (1 m + 1% x length) for reflective incidents
± (3 m + 1% x length) for non-reflective incidents2
Testing speed5 seconds typical testing time
ConnectorRemovable/cleanable SC adapter, UPC polish
Fiber types tested9/125μm singlemode
Detection of reflective incidents3-45 dB default threshold (user-selectable: -24 dB to -62 dB in 1 dB increments)
Maximum reflectance measurement-24 dB
Detection of loss incidents41.5 dB default threshold
Bulkhead qualityIf no fiber is attached or if the connector is dirty, the troubleshooter displays 0 m or 0 ft.
Live fiber detection

Detects optical signals from 1250nm to 1625nm and shows ACTIVE LINE if a signal is there.

Looks for a signal every 3 seconds after the first detection. +7 dB maximum input power.

European UnionConforms to relevant European Union directives
Australian GrayConforms to relevant Australian standards
Canadian StandardsListed by the Canadian Standards Association CSA C22.2 No. 61010.1.04
FCC RulesConforms to FCC Rules, Part A, Class A

1  ± user-configurable Index of Refraction (IOR) error ± the incident location error.

2  ± user-configurable Index of Refraction (IOR) error ± the incident location error.

3  Detects the location of an incident that has a reflectance larger than -62 dB. Detects incidents >2 m after the bulkhead connector when the bulkhead reflectance is <35 dB. Detects incidents >3 m after an incident when the incident reflectance is <35 dB.

4  Detects incidents >10 m after the bulkhead connector or any prior incident when the bulkhead reflectance is <-35 dB and the reflectance of any prior incident is  <-35 dB. The maximum link loss prior to the incident is <7 dB.


 

 

Documents

 

Data Sheets

Title/Description Download  
Fiber QuickMap and Fiber OneShot PRO Datasheet
Download PDF
Unlock Icon
 

Catalogs

Title/Description Download  
Fluke Networks Solution Catalog
The Guide for selecting and ordering Fluke Network Solutions and Products
Download PDF
5.58 MB
Unlock Icon
Fluke Networks 4 Page Catalog
Download PDF
1.08 MB
Unlock Icon
 

Application Notes

Title/Description Download  
Fiber Testing Best Practices - Pocket Guide
Download PDF
4.93 MB
Unlock Icon
 

Flyers

Title/Description Download  
Fiber OneShot PRO Troubleshooting Guide
Download PDF
183.51 KB
Unlock Icon
Testing in a Hybrid Network
This 11x17 poster outlines essential testing in a hybrid (copper and fiber) network.
Download PDF
514.3 KB
Unlock Icon
 

Gold Product Support

Gold Support for your Fiber OneShot PRO allows you to make the most of your purchase while ensuring a higher return on your investment. You will minimize your downtime, receive faster trouble resolution and have total access to all support resources.

What do you get with Gold Support for your Fiber OneShot PRO?

Repairs and loaner equipment - If your Fiber OneShot PRO should fail, we'll deliver a loaner unit via next business day delivery to keep you up and running. We'll repair your Fiber OneShot PRO and replace defective or faulty accessories at no charge, with first on bench" priority, and return it to you - all shipping paid by Fluke Networks.

Access to live 24 x 7 technical support - Extend the expertise of your staff. Gold Support includes direct, immediate telephone access to our world-class Technical Assistance Center (TAC), direct access only available to Gold Members. Our centers in Seattle, WA and Eindhoven, NL employ a full staff of highly trained technical experts that are on call, including weekends and through the night when most network changes are implemented, to answer complex troubleshooting questions helping you get the most out of your Fiber OneShot PRO and understand the results you are seeing.

Accessory Replacement - Some accessories are essential to your Fiber OneShot PRO. The normal warranty on accessories is 90 days, but parts and accessories that shipped with your tester will be replaced free of charge with Gold Support once qualified as defective by our technical assistance center.

Unlimited access to our Knowledge Base - You'll have an open door to valuable proprietary information we've gathered from helping customers over the years. It also includes helpful technical articles written by our experts.

Member Only promotions - Your membership qualifies you for members’ only promotions and programs. This includes product discounts, access to reconditioned equipment at special prices and other incredible values.

Ensure that you are getting the most out of your Fiber OneShot PRO with Gold Support Services.

 

 

 

Related Products